Once home use gas cooker gave a problem, the food flavor that burns gives is reduced at a discount greatly, for the family that loves cooking, intolerable simply. In fact, in daily use, gas stove more or less can appear some of the problem. Today, the 100 repair network summarizes the common maintenance failures of gas stoves. If you encounter these problems in the future, you can also judge the cause of the failure by yourself.
Problem one: the flame of gas cooker is abnormal
It is a very common phenomenon that the flame of gas stove is not normal. The reason may be from the fire or from the fire. Why will cause such a reason, it is likely that the pressure of the gas cooker is too strong, so it only needs to adjust the pressure of the gas cooker or improve the degree of the gas valve of the gas cooker.
Problem 2: The gas cooker has no spark
No matter what, the gas stove does not produce a spark, many families have encountered this problem. The cause of the malfunction is complex, but the most likely cause is that the gas cooker's battery is dead. Therefore, in this case, replace the battery of the gas cooker first, and determine whether there is no spark because the battery is dead. Next, if gas cooker is when rotating switch, what give out is "snap" sound, and do not have spark, the reason that causes this kind of phenomenon may be the ignition needle of gas cooker is broken or contact is bad.
Problem 3: The gas cooker will turn off automatically
The above two are not what the fault, the most afraid is to cook food to burn half, the gas stove suddenly flameout. Watching the dishes in the pot is not cooked, the gas stove here repeatedly flameout, really crazy. If this happens, you need to check whether the gas source of the gas cooker is blocked, and if it is, you just need to dredge it. In addition, there may be a gas cooker out of power or other causes of failure.
Problem four: the gas stove can be ignited as soon as loose extinguish
Under normal circumstances, the hand when gas cooker is ignited is loose to be able to extinguish, this is the protection device of gas cooker. This protective device will come into play in case the gas cooker becomes dangerous. But if the flame of the gas cooker is not burned to the electric thermocouple, it may be that the fire cover of the gas cooker is not put well, and it will be adjusted. If, burned the thermocouple of gas-burning stove, but still appeared the phenomenon that goes out automatically, the likelihood is to need to change thermocouple.
Problem five: there is a spark in the gas cooker
If the stove can produce sparks, it means that the battery of the stove does not have a problem, and the ignition and induction pins do not need to be replaced. Use a lighter to try to light a fire. If it does, turn the ignition pin so that it is near the edge of the hole. Or adjust the damper of the gas cooker so that the gas mixes with the air better, making it easier to ignite.
If the above methods have not been tried, it is recommended to find a professional maintenance master.
